Rubber to Rubber Mold Release
Date：2022-01-10 Categories：related product
| Post Date: |
Jan 09,2022 |
| Expiry Date: |
Jul 08,2022 |
| Detailed Description: |
Product Name: Rubber to Rubber Mold Release
Item No.: SilibaseRA-4ITT
Product Description:
SilibaseRA-4ITT Rubber to Rubber Mold Release is semi-permanent and water-based emulsion for inner tires demoulding. SilibaseRA-4ITT Rubber to Rubber Mold Release is designed for butyl rubber bladder of tire vulcanization. When properly applied to the inside of the green tire, this formula provides excellent air bleed and lubrication between the mold and the green tire resulting in good tire uniformity and minimal trapped air defects.
Usage Instruction:
● Clean the mold with proper detergent and use non-polluting green tire to avoid the bad combination of coating.
● To improve durability, strongly recommended to bake and warm up the green tire at 150℃ for 30 minutes in the oven after painted with release agent. Or put the green tire on vulcanizing machine after painted with release agent and cured by the heat of machine.
Shelf Life: Shelf life is 18 months at least from the date of manufacture.
Packing Description: 25kgs/barrel, 200kgs/drum |
