What aspects should be paid attention to when using EVA glass film?

EVA film is made of polymer resin (ethylene-vinyl acetate copolymer) as the main raw material, added with special additives, and processed by special equipment to produce a high-viscosity film material sheet. “EVA laminated glass film”. It has strong bonding force to inorganic glass, has the characteristics of toughness, transparency, temperature resistance, cold resistance, high bonding strength, high elongation at break, and good moisture resistance. It is the ideal and economical manufacturing safety laminated glass in the world. Adhesive materials, and can partially replace PVB materials used in the automotive and construction industries. The safety laminated glass produced by it can achieve ideal effects such as safety, heat preservation, wind resistance, impact resistance, sound insulation, and UV protection.

The EVA plastic glass film is a semi-transparent film with shallow surfaces on both surfaces before being heated. After being cured by heat, it has excellent transparency and a very high bond strength between the glass and the glass. It can be applied to various glass laminating processes, such as embossed glass, tempered glass, curved glass, etc., architectural laminated glass, decorative laminated glass, anti-theft glass, plastic laminated board.

The melting point of EVA film is determined by the melting point of the raw material, and the melting point of the raw material is generally 60-70 degrees. The melting point is just the temperature at which the film just begins to change its state, not the processing temperature. Save:

1) Do not press hard, generally stack two layers, not more than three layers;

2) Avoid light, and the room temperature should not exceed 40 degrees;

3) Keep away from heat sources;

4) Please use the film in time after opening, if not used up, please seal it. The storage period should not exceed nine months;

5) The corrosiveness of auxiliary materials such as edge banding agent and glass glue must be fully confirmed before use. These materials may contain materials that cause the film and glass to fall off.