| Detailed Description: |
Product Name: Zinc Alloy Diecast Release Agent
Item No.: SilibaseRA-4ZAL
Product Features of SilibaseRA-4ZAL Zinc Alloy Diecast Release Agent:
● No carbon deposition performance
There will be no carbon deposition or oxide scale on the mould or casting surface, do not affect the subsequent surface treatment such as electroplating, flame plating, etc.
● Excellent demolding performance
Spray die casting mould release to the mould surface then effective components immediately form dense membrane, the membrane in the injection process effectively prevent die-casting products and the mould glue together.
● Good cooling effect
Using the die-casting mould release agent and setting the mould temperature in 150-200 ℃, the mould will not cracks caused by heat and cold stress, which shortens the work cycle.
● High temperature resistant and excellent lubricating performance
Die casting mold release agent film uniformity, not accumulation, casting surface bright and no splash. Die releasing agent for high temperature mold surface has good adhesion, can in the mold temperature up to 200DEG C under the condition of operation.
● Cleaner & Safer environments
Die-casting release agent is non-toxic, no burning, no corrosion, no chemical reaction, and in the useing process there will be no harmful smoke or smell, you can have a cleaner & safer environment
● Clean and Smooth castings
No residue on the casting surface, easy for clean and maintenance.
Data Sheet of SilibaseRA-4ZAL Zinc Alloy Diecast Release Agent
Odor：Non strong smell Density：0.85g/ml
Appearance：Transparent red brown liquid Best working temperature：150℃-200℃
Flash point (COC)：Not applicable Refraction coefficient@20℃：1.2
Freezing point：-10℃ Ph (5% dilution)：7
Usage Description:
● The recommended usage (dilution ratio): General processing: 1:120, complex processing: 1:100. Please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio!
● The typical usage: 1kg release agent mixed with 100kgs purified water or mixed with 100 ~ 120 kgs diesel oil.
● If b e y o n d the typical usage, please contact us for technical support.
● Please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid.
● Unless the technical services allow outside, cannot add other material to concentrate and diluent. After dilution with water, it is milky white liquid.
● The concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage.
Packing and Shelf Life:
● 20Kgs/barrel, 170Kgs/drum
● Sealed and stored at room temperature for at least 18 months from manufacture date. |
