PU Mold Release Agent

Product: PU Mold Release Agent
Code: SilibaseRA-4311
General Information: SilibaseRA-4311 PU Mold Release Agent is the organ silicone and Teflon mixed liquid, excellent heat stability and chemical stability, good at remold and isolation effectiveness, non-corroding and without residual on the mould and good at mould surface, not influence the product’s adhesiveness and paint, not pollute the mould. SilibaseRA-4311 PU Mold Release Agent is concentrated of high pure silicone, avirulent insipidity, highlashing point for safety usage.
Application Method:
● The quantity of use is based on the complexity and material of mould, normally PU elastomer need to spray 2-3 times.
● In order to have a better disperse on the mould surface, suggest to using the solvent mixture to dilute the release agent.
Physical Data:
● Appearance：Colorless transparency liquid
● Density：0.96-0.98 g/ml
● Effective constituent：100%
● Viscosity：100-200 (MPas/25℃）
● Flashing Point：≥300℃
● Dilution ratio (by weight)：1:20 diluted with gasoline or naphtha or n-hexane
● Working temperature：30~180℃
Packing: 25kgs/barrel, 170kgs/drum
Storage: SilibaseRA-4311 PU Mold Release Agent should be stored in a cool place in its original package. Avoid direct contact with acidic and alkaline chemicals. Avoid heavy pressure and direct sunlight.