Mold Dope for Rubber Material

Product Name: Mold Dope for Rubber Material
Item No.: SilibaseRA-4ITT
What Is It:
SilibaseRA-4ITT Mold Dope for Rubber Material is semi-permanent and water-based emulsion for inner tires demoulding. SilibaseRA-4ITT Mold Dope for Rubber Material is designed for butyl rubber bladder of tire vulcanization. When properly applied to the inside of the green tire, this formula provides excellent air bleed and lubrication between the mold and the green tire resulting in good tire uniformity and minimal trapped air defects.
Product Features：
● It does not contain benzene and chloride solvents.
● SilibaseRA-4ITT Mold Dope for Rubber Material is applied by automatic or handheld spray gun and brush. The chosen is dependent on an individual tire plant’s equipment and logistics.
● Continuous effective operation after many times vulcanization and demoulding. The number of repeatable vulcanizations depends on use efficiency, vulcanization time and temperature, structure of tire and bladder.
Physical Features:
● Appearance：Milky white liquid
● Density(g/ml)：0.98-1.01 g/ml
● PH value：7.0-7.2
● Working temperature：70~150℃
● Dilution ratio：1:3-5 mix water by weight
● Solids, (% Nv)：35%
Storage & Shelf life:
● Please stored at indoor under 5℃-35℃ and away from acids and alkaline. Seal up container after open to use and need to use up diluted release agent within 3 days.
● Shelf life is 18 months at least from the date of manufacture.
Packaging: 25kgs/barrel, 200kgs/drum