SKYBON ES-410 saturated polyester resin
<p style="margin-left:0.0000pt; margin-right:0.0000pt"
Specifications
|
Parameters |
Unit |
Value |
|
Appearance |
— |
Transparent particles |
|
Molecular weight |
— |
16000 |
|
Viscosity |
dl/g |
0.50 |
|
Glass transition temperature |
℃ |
47 |
|
Softening point |
℃ |
120 |
|
Acid value |
KOH mg/g |
Less than 3 |
|
Hydroxyl value |
KOH mg/g |
4～8 |
|
Tensile strength |
kg/cm3 |
470 |
Application
White cotin in iron printing
Coil steel primer
Adhesive
Features
Suitable for deep drawing
Has good adhesion to iron, aluminum and tinplate
Flexibility and leveling
Dissolve
1. Add all solvents to the reactor.
2. While stirring, put the ES-410 solid into the reactor.
3. After putting in all the components, raise the temperature of the reactor to 90~100 degrees and stir for 2 hours. The maximum pressure in the reactor is: 2kg/cm2
4. Turn off the heating device, stir the mixture continuously for one and a half hours, and let the reactor cool down naturally.
5. Stop stirring, when the solution is filtered, put it into a 200kg bucket
Solvents used
MEK, toluene, acetone, SOVESSO, cyclohexanone, cellulose acetate, isophorone, DBE
Packaging
25kg/bag, 14MT/FCL
background-color:#ffffff”>2. While stirring, put the ES-410 solid into the reactor.
3. After putting in all the components, raise the temperature of the reactor to 90~100 degrees and stir for 2 hours. The maximum pressure in the reactor is: 2kg/cm2
4. Turn off the heating device, stir the mixture continuously for one and a half hours, and let the reactor cool down naturally.
5. Stop stirring, when the solution is filtered, put it into a 200kg bucket
Solvents used
MEK, toluene, acetone, SOVESSO, cyclohexanone, cellulose acetate, isophorone, DBE
Packaging
25kg/bag, 14MT/FCL