What are the types of linear electroplating automatic lines?

The structure or layout of the linear electroplating automatic line is characterized by arranging the various process grooves in a straight line (sometimes it can also be arranged in 2 to 3 straight lines), with a hoist on the top The hooked crane transports poles or rollers with workpieces on the rails to complete the electroplating process. For example, according to the electroplating method j, it can be divided into hanging (hanging) plating linear automatic line and barrel plating linear automatic line. For example, according to the type of vehicle body structure, it can be divided into (gantry) type, cantilever type and other special forms of straight automatic lines.

In fact, the linear electroplating automatic line is the fastest growing, most widely used, and most widely used automatic line among all kinds of automatic lines. Moreover, its development seems to be polarized. The high-end development adopts PLC microcomputer program control system. Because the computer has complete functions, the host equipment and auxiliary equipment of the entire automatic line are all concentrated in the main control room for control and management. It adopts a large touch screen, which is easy to adjust and clear at a glance. The process and procedures are convenient and flexible to adjust, and one line can be produced with multiple electroplating processes.

The simple automatic line is also very simple (if it is also called an automatic line). In fact, it only has two additional tracks on both sides of the ordinary fixed groove, on which there is a hand-carrying crane, a motor and a chain to drive the pole bar to move up and down. This is an automatic line often seen in some township and village enterprises. To be precise, it should be a semi-automatic line. Because the output is not large, the production efficiency is not high, and the chain drives the pole bar to move up and down slowly, and the plated workpieces can be parked in the air to wash the plated workpieces with water mist, which ensures the maximum recovery of the expensive gold plating solution; at the same time, it also reduces the operator’s cost. Labor intensity. Therefore, this production line has been used stably. Its flexibility in the order of electroplating processes and the adjustment of process time is almost the same as that of manual fixing tanks. This simplest and practical production line reduces the labor intensity of the operators and is the operator One of the prerequisites for accurate and effective implementation of electroplating process specifications.