2-ethylhexanoic acid solution of triethylenediamine

Overview:

Product name: Tris(dimethylaminopropyl)amine

Alias: Tris(dimethylaminopropyl)amine, low odor tertiary amine catalyst 9, low odor catalyst 9, tertiary amine catalyst 9

9 The catalyst is a low-odor tertiary amine that can balance the reaction of urethane and urea in soft and rigid foam applications. 9 catalyst as a co-catalyst, can be used together with blowing catalyst and gel catalyst to balance the reaction and provide a smooth rising curve.

Product properties:

Appearance: colorless to light yellow liquid
Viscosity (25℃, mPa.s): 6
Density (25℃,g/cm3): 0.87
Water solubility: soluble in water
Flash point (PMCC, ℃): 102
hydroxyl value (mgKOH/g): 0

Cetyl dimethyl tertiary amine amine catalyst B16 Soft foam amine catalyst B16 Hard foam amine catalyst B16

Typical physical properties table:

Product usage:

9 is a low-odor tertiary amine catalyst that can balance the reaction of urethane and urea in soft and rigid foams;

9 can be used as a co-catalyst for foaming and gel-enhancing amine catalysts to balance the reaction and make the starting reaction stable;

9 Mainly used for polyurethane rigid foam, polyurethane insulation foam, spray foam, laminate and refrigerator plates;

9 It can also be used for polyurethane microcellular foams, such as polyurethane shoe soles.

Shelf life:

Keep it unopened for two years

Recommendations for use:

It is recommended to use 9 catalyst for various rigid polyurethane systems. The main application is thermal insulation/insulation edge foam, including sprayed rigid foam, polyurethane insulation board, polyurethane insulation pipe, refrigerator, solar rigid foam, etc.

It is recommended to use 9 catalysts for microcellular elastomer foams, such as shoe sole formulations, and as co-catalysts in semi-rigid foam and polyurethane flexible molded foam applications .

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Store in a cool, dry place, keep the container tightly closed, and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, as this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided as much as possible.