Polyurethane catalyst SMP

Overview:

Name: Polyurethane catalyst SMP

Alias: polyurethane catalyst SMP, catalyst SMP, amine catalyst SMP, delayed catalyst SMP, hard foam catalyst SMP, sponge catalyst SMP, sponge foaming catalyst SMP, low density Sponge catalyst SMP

catalystSMP is a low-density sponge or a special delay catalyst for molding, which can increase the hardness of the foam and is especially suitable for Used in sponges with a density in the range of 6-25kg/kg, and can increase the foam hardness by 5-10%;

Since SMP can increase the hardness of the sponge, if you want to maintain the same hardness, you can reduce the isocyanate index by about 2 to 3 points, which is economically Very cost-effective;

Whether it is in the MC formula or in the formula with fillers (CaCO3 and melamine), SMP can improve the processability of the foam and reduce cracking;

Purpose:

SMP is widely used in soft block foam and heat curing molding. The recommended dosage is 0.15-0.2 pphp.

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

180KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits.